Vigor2130

From SixXS Wiki
Jump to: navigation, search

Simple steps to get your ipv6 tunnel working with the Vigor 2130.

1. make sure you have firmware 1.5.1 or higher (http://www.draytek.com/user/SupportDownloads.php)

2. set your tunnel type at AYIYA

vigor_tunneltype.png

3. set password for your tunnel

vigor_ticpassword.png

4. go to the ipv6 menu in your router config

vigor_menu.png

5. set the WAN settings

vigor_wan.png 

 - Ipv6 connection type: AICCU
 - Username: handle/tunnelID
 - Password: see the password from step 3
 - Server: tic.sixxs.net
 - Tunnel type: AYIYA
 - Tunnel ID: see the config from sixxs.net

6. set the LAN settings

vigor_lan.png 

  - Ipv6 address: enter the ipv6 subnet address (add at the end "::1") assigned to you by sixxs.net

7. enable WAN ping

vigor_mgmt.png 

  - not sure if needed, but enable WAN ping

This will setup a working tunnel. Test e.g. at http://test-ipv6.com/

Retrieved from "http://www.sixxs.net/wiki/?title=Vigor2130&oldid=4170"