No IPv6 address on Vista
![]()
Hi,
I tried now everything I can imagine but I'm not able to give my VistaPC an ipv6 address.
Windows is configured to retrieve everything automatically.
(my Mac notebook works fine)
My Vista hasn't even a link local v6 address.
ipconfig /all says:
Windows-IP-Konfiguration
Hostname . . . . . . . . . . . . : idefix-PC
Primäres DNS-Suffix . . . . . . . :
Knotentyp . . . . . . . . . . . . : Hybrid
IP-Routing aktiviert . . . . . . : Nein
WINS-Proxy aktiviert . . . . . . : Nein
DNS-Suffixsuchliste . . . . . . . : idefix.lan
Ethernet-Adapter LAN-Verbindung*:
Medienstatus. . . . . . . . . . . : Medium getrennt
Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Check Point Virtual Network Adapter For S
ecureClient
Physikalische Adresse . . . . . . : 54-38-DA-14-02-05
DHCP aktiviert. . . . . . . . . . : Ja
Autokonfiguration aktiviert . . . : Ja
Ethernet-Adapter LAN-Verbindung:
Verbindungsspezifisches DNS-Suffix: idefix.lan
Beschreibung. . . . . . . . . . . : NVIDIA nForce Networking Controller
Physikalische Adresse . . . . . . : 00-1A-92-63-08-03
DHCP aktiviert. . . . . . . . . . : Ja
Autokonfiguration aktiviert . . . : Ja
IPv4-Adresse . . . . . . . . . . : 192.168.0.151(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Lease erhalten. . . . . . . . . . : Montag, 16. Februar 2009 09:53:59
Lease läuft ab. . . . . . . . . . : Dienstag, 17. Februar 2009 09:53:59
Standardgateway . . . . . . . . . : 192.168.0.251
DHCP-Server . . . . . . . . . . . : 192.168.0.251
DNS-Server . . . . . . . . . . . : 192.168.0.251
Primärer WINS-Server. . . . . . . : 192.168.0.251
NetBIOS über TCP/IP . . . . . . . : Aktiviert
Ethernet-Adapter LAN-Verbindung 2:
Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
1
Physikalische Adresse . . . . . . : 00-50-56-C0-00-01
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
IPv4-Adresse . . . . . . . . . . : 192.168.11.1(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Standardgateway . . . . . . . . . :
NetBIOS über TCP/IP . . . . . . . : Aktiviert
Ethernet-Adapter LAN-Verbindung 3:
Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
8
Physikalische Adresse . . . . . . : 00-50-56-C0-00-08
DHCP aktiviert. . . . . . . . . . : Nein
Autokonfiguration aktiviert . . . : Ja
IPv4-Adresse . . . . . . . . . . : 192.168.188.1(Bevorzugt)
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Standardgateway . . . . . . . . . :
NetBIOS über TCP/IP . . . . . . . : Aktiviert
I tried already to reset winsock with:
netsh
winsock
reset
I tried to give the box a manual v6 address but no success.
Has here anyone an idea?
Thanks
Matthias
No IPv6 address on Vista
You don't seem to have any IPv6 at all, even no link-local addresses.
I tried already to reset winsock with:
Why winsock?
You might try two things (as an administrator of course):
netsh int ipv6 reset
netsh int ipv6 install
The latter though, should always be the case on Vista.
Which Vista version do you have?
No IPv6 address on Vista
![]()
I tried it and got the following message:
netsh int ipv6 reset
Fehler beim Zurücksetzen von Echoanforderung.
Zugriff verweigert
Es sind keine vom Benutzer festgelegten Einstellungen zum Zurücksetzen vorhanden
.
(the console was started with admin rights.
And to answer the question from David, yes IPv6 is enabled. I even tried to give a manual address, which doesn't change anything.
It is Windows Vista with newest service pack and all updates installed.
Bye
Matthias
No IPv6 address on Vista
![]()
Does Network and Sharing Center->Local Area Connection->Properties show both the ip4 and ipv6 checked? If not you need to add ipv6 protocol.
|