|
issues with ausyd01.sixxs.net?
![[au]](/s/countries/au.gif) Shadow Hawkins on Monday, 22 December 2014 10:16:28
HI. I have had my tunnel working for a few weeks now and it seems it stopped on the 19th and i'm not sure why? I have a cisco router my end and its been working with out issue. Everything on my side looks ok. The tunnel is up and no config changes on my end to stop it working. (that i know of) The router has been rebooted and still no luck. What are the steps that should be taken work work out what the issue is?
issues with ausyd01.sixxs.net?
Any technical details?
issues with ausyd01.sixxs.net?
Shadow Hawkins on Tuesday, 23 December 2014 01:59:17
Config from Cisco Rrouter
interface Tunnel3
description sixxs
no ip address
ip tcp adjust-mss 1420
ipv6 address 2001:4830:1200:4F::2/64
ipv6 enable
keepalive 10 10
tunnel source 202.62.159.246
tunnel mode ipv6ip
tunnel destination 66.186.206.66
AndrewHome#show ip int tun3
Tunnel3 is up, line protocol is up
Internet protocol processing disabled
What else do you want to have a look at? Thanks
issues with ausyd01.sixxs.net?
Config from Cisco Rrouter interface Tunnel3
that is configuration, it does not show what is actually running.
See the contact page for a large list of things to check.
AndrewHome#show ip int tun3 Tunnel3 is up, line protocol is up
proto-41 tunnels do not have a concept of 'up' even though silly boxes claim they are up, does not mean they are configured correctly.
issues with ausyd01.sixxs.net?
Shadow Hawkins on Tuesday, 23 December 2014 02:19:23
sorry found the issue. Turns out the static ip i had for the last 4 years changed.
issues with ausyd01.sixxs.net?
Andrew Paternoster wrote:
sorry found the issue. Turns out the static ip i had for the last 4 years changed.
That is what most people will call semi-static. Indeed, just use a static tunnel for these as they won't update often enough to warrant the heartbeat overhead.
Just update the tunnel endpoint in the webinterface and all will work fine again.
|
![[ch]](/s/countries/ch.gif)
on Monday, 22 December 2014 10:20:02
Posting is only allowed when you are