|
ipv6 for nat
![[pl]](/s/countries/pl.gif) Shadow Hawkins on Sunday, 06 March 2011 06:46:06
Hi!
I have internet neostrada (dynamic ip address) in the house connected by a router pentagram 6331-42 (connected to two kompy a wi-fi, but the second after), made the sixxs tunnel, the tunnel is a type of heartbeat (dynamic IP behind a NAT), it all comes under the xp, I use aiccu to include tunnel
Aiccu fired and turned and I can not open any page in the browser ipv6 (in network connections is a protocol ipv6 ipv6 ip assigned to us but we did not see me on the web at this ip ipv6 ipv4 IP only)
The problem is the router
Just saying because, as I tested the connection via modem aiccu tunnel is all about.
after connecting the router has no traffic
Please help me very concerned about this
ipv6 for nat
![[us]](/s/countries/us.gif) Shadow Hawkins on Sunday, 06 March 2011 21:28:51
Is your router passing protocol 41?
ipv6 for nat
Shadow Hawkins on Thursday, 10 March 2011 01:21:46
The browser is more complication than you need right now. Can you ping (windows) or ping6 (*nix) ipv6.google.com or its direct address [2001:4860:800f::93]? If so then it could be browser settings. Firefox turns ipv6 off with network.dns.disableIPv6 in about:config.
ipv6 for nat
Shadow Hawkins on Thursday, 10 March 2011 20:12:19
everything ok! wrong drivers were not installed Tap32
after installing the drivers and select the tunnel ayiya everything works.
How to add aiccu tunnel with hurricane?
This link says that you can.
http://www.sixxs.net/tools/aiccu/brokers/
ipv6 for nat
Shadow Hawkins on Thursday, 10 March 2011 21:08:48How to add aiccu tunnel with hurricane? This link says that you can. http://www.sixxs.net/tools/aiccu/brokers/
No, it says you can't. HE does not use TIC or TSP. To get an HE tunnel go to
tunnelbroker.net.
ipv6 for nat
Shadow Hawkins on Saturday, 12 March 2011 06:04:56
Of course, I'm sorry ....
|
Posting is only allowed when you are