|
Newby question: cannot resolve IPv6 address
![[nl]](/s/countries/nl.gif) Shadow Hawkins on Monday, 18 August 2008 17:56:07
Sorry, newby here.
I signed up for a SixXS tunnel account and installed the AICCU software with the proper tunnel information. Status is enabled.
Now I should be able to tracert IPv6 addresses right? Well, somehow this setup does not work. You can help me find the fix?
Running on a Vista machine behind Linksys RV042 router.
Newby question: cannot resolve IPv6 address
![[ca]](/s/countries/ca.gif) Shadow Hawkins on Monday, 18 August 2008 21:28:20
First can you ping6 ipv6.google.com from your Windows machine, if not see if the answer from David Horn (near the bottom) in the following thread solves your problem:
http://www.sixxs.net/forum/?msg=setup-714300
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Monday, 18 August 2008 21:54:00
No, ping -6 ipv6.google.com (ping6 is an XP command) or tracert -6 ipv6.google.com are both unable to resolve the ip address.
Ping -6 or tracert -6 to its IP address 2001:4860:0:2001::68 results into failure code 1231.
Any ideas?
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Tuesday, 19 August 2008 07:34:25
I have changed tunneltype AYIYA into 6in4-static, since my ISP gives me a fixed IP address I should this would be the right thing to do.
In SixXS home my tunnel information shows my personal IP now in the Your IPv4 field. Somehow I have managed get my ISK down to -5 :s
However, PING -6 and TRACERT -6 commands to any IPv6 IP still results in a 1231, so I did not cross any bridge.
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Tuesday, 19 August 2008 10:51:09
I took a look at your David Horn suggestion and entered opened the Windows networkcenter, networkadapter properties and properties voor IPv6.
Entered 2002:81a8:102:: as suggested and in the next field the number 48.
Left fields Standardgateway and DNS-servers empty.
This did not resolve the problem.
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Tuesday, 19 August 2008 18:05:23
In SixXS home I have switched 6in4-static back to AYIYA since 6in4-static demands a IPv6 caple router which my Linksys RV042 isn't.
My ISK is now -20 :(
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Tuesday, 19 August 2008 19:53:03
Stupid me, I forgot to instal the tun/tap driver.
Now my system is able to resolve an IPv6 address, however pings and tracerts go into time-out.
Newby question: cannot resolve IPv6 address
Shadow Hawkins on Tuesday, 19 August 2008 20:58:07
Aiccu autotest runs as far as
###### [6/8] Ping the IPv6 Remote/PoP Inner Tunnel Endpoint (2001:610:600:4ed::1
)
### This confirms the reachability of the other side of the tunnel
### If it doesn't reply then check your interface and routing tables
### Don't forget to check your firewall (both IPv4 and IPv6) of course
### If the previous test was succesful then this could be both
### a firewalling and a routing/interface problem
Pingen naar 2001:610:600:4ed::1 van 2001:610:600:4ed::2 met 32 bytes aan gegeven
s:
Time-out bij opdracht.
Time-out bij opdracht.
Really don't know what to do know :(
Newby question: cannot resolve IPv6 address
![[de]](/s/countries/de.gif) Shadow Hawkins on Sunday, 14 September 2008 10:45:59
Still no solution to your problem?
It would be helpful to know if the router itself can ping6 any hosts. Is there any kind of shell interface in the configuration of the router?
Greets from tim, with IPv6 internet access since today :-)
|
Posting is only allowed when you are